QC 35 ANC no longer works for mids and highs after updating to firmware 3.0.3 - Error LOG

[Serj]

I have recently updated to the latest 3.0.3 firmware via the desktop browser updater. Right now I have checked the advanced menu of the desktop updater (while on the updater screen located at https://btu.bose.com you should press the following 5 keys sequentially on your keyboard: ‘a’ ‘d’ ‘v’ ‘<UP arrow="">’ ‘<DOWN arrow="">’) and found this Error log displayed for my update:

Error Log

6/28/2019 23:14:20.029, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:14:20.029, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

6/28/2019 23:14:20.112, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:14:20.112, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

6/28/2019 23:14:20.175, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:14:20.176, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

6/28/2019 23:14:21.111, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:14:21.111, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

6/28/2019 23:14:22.179, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:14:22.179, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

6/28/2019 23:14:23.247, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:14:23.247, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

6/28/2019 23:14:24.315, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:18:25.194, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:18:25.194, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

6/28/2019 23:18:26.262, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:18:26.262, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

6/28/2019 23:18:27.330, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:18:27.330, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

6/28/2019 23:18:28.398, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:18:28.398, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

6/28/2019 23:18:29.466, Error, Device::sendQuery failed to send report (2 - lc)

6/28/2019 23:18:29.466, Error, 'lc' QUERY NOT SUPPORTED - RETURNING EMPTY

Can a moderator explain what this means? (the actual report is longer but had to clip it since there are only 500 characters allowed for a post)

Thanks in advance

[Serj]

Once you open the ADVANCED MENU you have the possibility to reapply the update. I have pressed the button hoping that this could fix my issue but unfortunately I have also refreshed the paged while the update was loading. After the refresh there was a page saying not to disconnect and a countdown instructing on how long i have to wait for the update to finish. Once it was done, I have reveisted the ERROR LOG page and another error message was dispplayed: 7/6/2019 21:20:47.193, Error, Called method getCurrentDevicesConnected without a session . Considering that it was my fault I have reinitialised the procedure, and made a new full update, that this time ended with a green SUCCESS message.

Unfortunately, no change in the outrageously poor ANC situation.

[Serj]

@Community_Admin is this considered NOT TO BE one of those "Rarely relevant solicitations" you were talking about?

[Hector_B]

Hi Serj,

Thanks for posting and updating us on this. 

I would recommend that you check out this thread here regarding why we don't recommend that you perform a downgrade.

Kind Regards, 

Hector B - Community Support 

[Serj]

Hi Hector_B,

I know you don't recommend (you forbid actually, because I would have tried if it was up to me, but Bose also killed this alternative as it killed the ANC with 3.0.3).

My question is regarding those errors though, that have nothing to do with a downgrade procedure. The first Error Log is from the moment I've updated to this outrageously good for nothing firmware 3.0.3.

Can you please let me know what it means?

[Serj]

I am still waiting for an answer...

[Serj]

“When truth is replaced by silence,the silence is a lie.” 
― Yevgeny Yevtushenko

Everything going well on your end, dear moderators? I lost $350 worth of premium product about a month ago. I think I know who's fault it is, but I'm going to let everyone else to take a not so hard guess. Shame on you, nevertheless.

[Serj]

So many online moderators ( @Jeff_G  @Jessie_O  @Hector_B  @Andy_B  ) and no relevant answers, only appologies and good for nothing, soft reset instructions. Why don't you answer?

[Serj]

Hi, @Charlotte_G , please reply to this problem on this posts specifically. This will avoid confusion and keep information and troubleshooting in the appropriate places.

Thank you in advance.

[Andy_B]

Hi Serj,

This information is related to the firmware update website and its associated firmware. Its sole intent is feedback for our development team should it be required.

As this issue is now resolved, we will be closing this thread.

Kindest,

Andy B