Thanks for posting, good question! The short answer is yes to all except the Acoustimass 10 II which uses different connections from the later ones. The wiring for all the Acoustimass 10 III and later would be compatible. The wire bundle that goes from your receiver connects with bare wires to the receiver and DB15 connection block on the bottom of the Acoustimass Bass Module. Going out to the five channels from the bass module you have RCA style connectors on the end that connects to the bass module and bare speaker wires going into the back of the Direct Reflecting Cubes. On the latest AM10 series 5 we introduced the Direct Reflecting II which uses adapters to connect to the cubes, these can be removed. Hope this helps, thanks again for the question and have a great day!