Hi I am trying to connect my soundbar 700 universal remote to control other things like my tv, DirecTV box and my Sony 4K player. All I can get it to do is switch the TV (samsung tv) on but even then I can't get the remote to perform any functions. It works ok with the soundbar but I can't pair it with anything. When I go into the Bose app and select configure sources there is just nothing there.
Very very confused!
Hi @Mickknolwes, Thank you for reaching out and welcome!
I'm sorry to hear of the issues you are experiencing with your universal remote and will be more than happy to help you.
I have included a LINK HERE which will provide all the information you need to program the remote.
If you need any further assistance, do not hesitate to reach out again!
Thanks for the response. Unfortunately that didn't help. When I go into the remote settings of the app there are 3 sections.
TV - inside this section it just says "Television" with an option at the bottom to remove the tv.
Configure Sources - in this section there is nothing at all other that a header which says "source buttons" but nothing else there.
Advanced - in this section it just says "Bose Universal Remote" with an option at the bottom to remove the remote.
There is no other guidance on how to add a device to the app or remote.
Thank you for coming back to us! This is certainly unusual. Underneath the source buttons header, you should see 'Add a New Device'.
I would recommend removing the remote in the advanced settings. Then deleting the application and reinstalling it. Once complete, re-pair your remote using the app.
Let me know how you get on!
That was the first thing I tried. I removed the remote from the app, then removed the soundbar config then deleted the app entirely then went through the whole thing from scratch but still when I click into sources there is nothing at all there and no way to add one???
Do you have another device with the app installed on it that you can try?
Let me know!
You should be able to attach images to your post.
In regards to the issue, do you remember going through the initial setup process for your Soundbar 700 where it would've asked you to configure your remote to control the soundbar?
What you may want to try is the following steps to connect the remote to your soundbar without using the app:
Let me know if you make any progress!