I don't work for Bose and many in multiple Bose forums have commented on this issue. I won't go into much detail here since you can read about it elsewhere. You have discovered that in Bose's bluetooth implementation, they have taken advantage of Bluetooth Low Energy (BLE). You can actually use an app on your phone (most of free) to determine whether the Bose device is emitting a BLE signal. So the BLE implementation by Bose is 'by design' IMHO and not a bug (so far.... ). This allows the device to have a small amount of functionality all the time to do things like get turned on by the Bose Connect app and to go into Party/Stereo mode through the app. It will also explain why it turns on in response to another device turning on.
The good news is that it does not happen with all the Bluetooth implementations. My Revolve was turning on every time I turned on my laptop when I was using my Intel BT hardware on my Dell. I have since disabled it and use the SMK Nano BT USB Dongle (about $12 on ebay). As far as I can tell, the Revolve does not turn itself on anymore when I turn on my laptop.
So here is the bottom line as I understand it. You can not turn off the Revolve - ever. Not in the sense of your understanding off meaning cesation of all power. The on/off switch on the Revolve does not go from on to off. Off is not Off. The on/off switch is merely a 'toggle' between a fully functioning device and a reduced functioning device in BLE mode/state.
So here is what I believe are your options:
1. Return or sell the Revolve and get a speaker that does not implement BLE. Even some Bose devices qualify. My Bose Sounlink Mini does not support BLE at all (or Bose connect) and my headphones, QC35ii are totally off when off - not in BLE state as far as I know.
2. Change your BT hardware like I did ($12 is not much money to solve this issue) though I can not guarantee you my dongle will solve your issue
3. Un-pair the Revolve when not being used
4. Turn off the Revolve any time you turn on your laptop
5. Keep working with Bose to convince them to change their BT implementation for BLE (though remember, it is not happening on all BT implementations).
I am worried about this too is it bad for you to have the BLE emitting signals throughout your house 24 hours a day and not being able to turn it completely off i tested it with one of those ble apps and it could pick up my revolve plus , way out the back of my house down the back garden miles from my house, so i cant even put it in my house to escape the radiation, does anyone know if this is bad for your health.
Thanks for posting. I can understand your concern. While there isn't a lot of data available that clearly defines the level of risk from BLE devices, keep in mind that BLE uses far less power than standard Bluetooth transmissions and both use much less power than your cell phone's radio. I hope that helps!
Greg - Community Support
Doesn't change the fact that this ble feature is still a pain in the ass for users. How hard is it to provide us with an option to turn this feature off? Why do you have to include a feature that is causing so many people problems? Or should we have the option to just downgrade our firmware?
I am not a Bose employee, but here is my take having 2 Revolve's myself.
1. My two revolves do not currently turn themselves on. They used to turn themselves on my Dell laptop. So I just did another test with the original Intel bluetooth hardware and it indeed did turn on. However, when I was using the SMK Nano bluetooth dongle with CSR drivers, turning on the laptop did not cause the revolve to turn on. So whether it turns itself on or not for a computer power on will depend on which bluetooth hardware is communicating with it. For those which cause it to turn on, the workaround for me has been, to un-pair and remove the Revolve as a device. With the hundreds if not more possible permutations of computers with third party bluetooth hardware, Bose has said here in past months they can not test them all out and so I am guessing they don't look at the issue at all. It may be possible that a future firmware release could positively impact the turn on for a particular configuration but I would not expect to see that myself.
2. I have never seen any of my revolve's turn on for anything other than a desktop/laptop power on. So for example, for my iphone 7+, I have not yet/ever seen a paired revolve turn itself on when I power on my phone (which I have to admit is quite rare).
3. Bluetooth is a standard implementation of hardware and layered protocols. BLE has been part of the BT protocols for some years now and the Revolve's were manufactured I am guessing to take advantage of BLE functionality. As far as I can tell, BLE is implemented to allow Bose Connect to turn on the Revolves through the app and to turn them to put them into Party/Stereo mode. These features are 'by design' and I don't believe Bose is going to make them optional for this product as they are probably spending their efforts in designing their follow-on BT products (using BT 5.1) which I would guess will be out before end of year holiday season. The 'turning on' situation with computers is likely not 'by design' but I don't believe is going to spend much time troubleshooting it since it does not happen with all BT computer vendor implementations.
4. I am 'judging' that Bose designs and manufactures its Bluetooth devices for the mobile market and that is their emphasis for support as well. They will not spend much time troubleshooting or diagnosing issues with Windows or Mac laptops and computers - especially communication problems/issues involving BT.
5. Bose used to allow customers to downgrade firmware but they no longer do. You/we can try to get them to support that again, but I would not give it much hope personally in the short term.