here is the configuration I had
Track One Vocal
Track Two Vocal
Track 3 Acoustic guitar with pedalboard
Track 4 RC 300 looper with pre recorded Loops in Pro Tools
like this I couldn't record my guitar in the looper.
I tried my guitar in my pedalboard Gtr-Tuner-Boss OC3-EQ-El Capistan-Bigsky into RC300 input, great I can loop my guitar with effects. but all is in the same track 4 on T4S... I can't control both volume except with RC 300 instr level and master lvl....
I would like to know if there is a way to use for example the T4S compressor on track 3 for acoustic guitar or should I have a compressor pedal on my pedalboard? easier...
And if there is a way to wire so that I can have my guitar on track 3 and the RC 300 on track 4 of T4S. and still be able to loop guitars with RC 300.
I thank you in advance
Sep 17, 2019
Two ways I can think of,
1, Use an ABY switcher, live guitar into switcher, CH3 via output A, and looper via output B, The Y setting on the switcher lets you send the guitar to both CH3 and the RC300 simultaneously.
2, Use the L/R outputs on the RC300 to send to CH3 and CH4 routing the live guitar, unaffected or looped to L>CH3 direct and the loops to R>CH4 inside the RC300 (great looper BTY, I have one).
Somebody else will have to answer WRT the compressor question.