Connect iPhone to L1 model II using Logitech Bluetooth receiver

[Rocket8]

hello,

i buy a Bluetooth logitech. If i connect only one side with the plug RCA on the logitech and i plug  on analog to the T1 , its work well. This setup its ok or its dangerous to cause damage???

thanks

---

Edit Subject: Previously "Connect iPhone to L1 model II"

Bose Pro Community Admin  

[ST - Pro]

Hi Rocket8,

Are you talking about this device?

Logitech Bluetooth Audio Receiver

If so, then use the cable that comes with the unit

Connect the 3.5 mm end to the Aux Output and add adapters like these to the RCA plugs

OR

A cable like this from the Aux ouput

OR

Use a cable like this from the RCA outputs

THEN

Connect the 1/4 plugs to T1 inputs 4/5.

You won't harm anything.

Does that help?
ST

[Rocket8]

Its the good device, but i dont have a t1. I Want to know if it possible to Connect direct on L1

[ST - Pro]

Hi Rocket8,

Rocket8 posted:

Its the good device, but i dont have a t1. I Want to know if it possible to Connect direct on L1

Oh - I read that you are connecting a T1, in your original post.

Rocket8 posted:

hello,

i buy a Bluetooth logitech. If i connect only one side with the plug RCA on the logitech and i plug  on analog to the T1 , its work well. This setup its ok or its dangerous to cause damage???

thanks

You have to set the iPhone output to mono.

Then use the cable that comes with the Logitech unit

Connect the 3.5 mm end to the Aux Output and add ONE adapter like this to the ONE of the RCA plugs

Then you can connect to the L1 Model II Power Stand Analog Input.

ST

[Waukman]

Try this!

try this