Headphone out to the S1 Pro XLR-In
Hi ... I'm running short of outputs from my Mixer.
I'm aware I can feed the S1 Pro's (first 2 channels XLR-In) either a Line/Stereo Out from my Mixer or even the Aux-Out.
However, can I use the Headphones socket to feed an output to the S1 Pro Channels?
Of course I'd use either a headphones stereo out to a single (summed/mono) XLR-in ... either Channel 1 or 2 on the S1 Pro
... or ...
or a headphones stereo out to dual XLR-ins ie Channels 1 and 2 on the S1 Pro
Would both work? If not ... why?
Pls check the attached Analogue Output specs of my Mixer's Data Sheet attached ... and links of the proposed cables.
Link1 - https://www.amazon.in/Cable-Ma...WJ2GNC3G74JX0VB95WD2
This cable converts a Stereo Signal to a Mono one ... so should work
Link2 - https://www.amazon.in/Cable-Ma...RA8FDBNX0B47NJB3R4AJ
This cable doesn't specify if it converts a Stereo Signal to a Mono one ... so I'm unsure if it will work. I would prefer to use THIS CABLE as it's a 1/4" jack and will fit my Mixer's Headphone socket AS-IS, without any converter.