L1 Model II w/TI Tone Match
I have been been using a L1 Model II system w/the T1 Tone Match mixer for a while, now. I am a solo guitar/vocalist and play frequently at area churches. I use a Shure SM57 microphone and either a Taylor T5 or Takamine Santa Fe Acoustic guitar.
Recently, I experienced the following:
I was performing at a church I had played at previously with no problems. The setup and sound check went fine and, since I was not going to be performing immediately, I powered the system down. When it was time for me to play, I powered up (as I typically do), and I couldn't get any sound out the speakers, only an unusual static/humming sound. I checked all cable connections, etc. and tried shutting down and powering up again, but still had the same result. When I got the unit home, I set it up and tried to replicate the problem, but the system worked just fine. Do you have any ideas as to what could have caused this? All I can think of is that something was causing electronic interference with the T1 Tone Match unit but, since I had played at that venue multiple times without any incidents, I am at a loss as to what could have caused the interference. Any help would be greatly appreciated. Thank you.