L1 classic half work
Hi to you all, I am Fabrizio from Italy. I have a couple of used (not by me) L1's classic with 4x B1. One is perfect, the other nope. I run them always with a line input in the input 3 (at volume 3) and already tried the input 4. The broken system sound awful, No eq and NO x-over. I have full range in the sub output, Removed the radiator and checked the 3 amps individually. All works correctly if driven from their inputs. If I use one of the classic line inputs (3 and 4) in every amps out I have the same signal as I use the "all amps" input. Tried also to plug in/out the B1s. In the working PS1 i had an audio lack, due to the DSP is arranging new set-up, all normal. In the "broken" PS1 all the amps out works as a full range amps, nothing happens pluging the B1, no lacks, no eq and DSP starts. It works always in all amps mode, with every input and every speaker configuration. I hope my english can be enough for let you understand my issues. So, I really hope someone can help me with some tips, I can open and check some electrical inside, not an expert, but able to do it. Cheers. Fabrizio.