cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
TW8020
Contributor
  • 0
  • 4
  • 0
Registered since

Jun 18, 2019

Recording Direct From T4s to Zoom H6

I want to record direct from my T4s to my Zoom H6. However, when I connect the L/R outputs on the T4s to the Zoom H6 using TS/TRS 1/4" cables, I get nothing but loud hiss and static. What am I doing wrong?

4 REPLIES 4
Dylan_R
Moderator

Re: Recording Direct From T4s to Zoom H6

Hi TW8020!

This is strange. What inputs do you have going into the T4S?

Does the static still occur if you connect the outputs on the T4S to a set of speakers?

Feel more. Do more. Be more.
Come check out my profile here. New to the community? Check out the Getting Started board.
Help others find answers to your questions by clicking on 'Accept as Solution' at the bottom of a reply. If you see a post you like, make sure to give it a thumbs up!
TW8020
Contributor
  • 0
  • 4
  • 0
Registered since

Jun 18, 2019

Re: Recording Direct From T4s to Zoom H6

Thanks for the response Dylan. I have tried 1/4" TRS AND 1/4"TS Into the T4S L/R Aux Out. I can get a somewhat clean signal using the Headphone out with a TRS.

Dylan_R
Moderator

Re: Recording Direct From T4s to Zoom H6

Hi TW8020,

Make sure you're using the T4S's main stereo 1/4" outputs instead of the AUX outputs - located next to the USB ports:

Hope this helps!

Feel more. Do more. Be more.
Come check out my profile here. New to the community? Check out the Getting Started board.
Help others find answers to your questions by clicking on 'Accept as Solution' at the bottom of a reply. If you see a post you like, make sure to give it a thumbs up!
SCOTT_GOURLAY313
Participant
  • 0
  • 1
  • 0
Registered since

Jan 2, 2021

Re: Recording Direct From T4s to Zoom H6

Yes Sir... Use the Main R, L outputs not auxiliary 5, and 6... If there is still an issue make sure your pan setting is at least 12 o'clock in the middle, or all the way right for R output, and all the way left for L output...  I've had best experiences with TRS cables myself, but I've read TS will work... I personally use TRS shielded, and balanced cables to my speakers or anything else like the zoom H6 Check all your levels in and make sure to gain stage... Check the master out in the settings on the T4S, and make sure they are post if you want the effects, or pre if not...You can use the Auxiliary if you wanted due to R, L, being used some other way, but then you would still have to check all the settings in the master input/output area to route the audio as well... if you've done all that and still have issues I would check my cables, and then on to settings in the H6 which is a whole other area of issues to make sure you have checked to eliminate the issue...hope this helps... I'm no pro but, I've learned alot from trial, and error, reading on this site, and across the web from experiencing similar issues...If you do all that I'm sure it's probably not the Bose unit rather something simple in the H6...Goodluck!