Paulin
Member
  • 1
  • 11
  • 0
Registered since

May 30, 2014

Re: S1 Pro system: Feature Requests and Suggestions

Yep, a 3rd. channel.  I returned my S1 as I just could not live without a 3rd. channel.  Replaced it with another brand with 3rd. channel. 

Wirelessdj
Participant
  • 3
  • 81
  • 0
Registered since

Jan 30, 2019

Re: S1 Pro system: Feature Requests and Suggestions

I love these speakers.  I purchased them primarily for DJ use, wedding ceremony, small parties, and outdoor functions and can use them around the house.

Now that wireless pairing is working, I can use my 12.9" iPad Pro with 512GB of music and cellular data connection.  I can DJ anywhere even when there is no power.  

What I think is needed

1.  Auto Wireless Pairing, have the speaker remember the other one and auto pair when turned on.  

2.  The ability to select the sound settings (table top mode, pole mode, monitor mode, etc).

3. The ability to control the overall EQ of the speaker

4. The ability to see battery life of each speaker

5.  Wireless pass through.  When no bluetooth signal is present, but S1's are paired, route input 1 and 2 of 1st S1 to the other speaker over bluetooth channel of 2nd S1.   I realize there is a delay but it still is useful.  If a DJ is playing music in one room from a mixing board, the other speaker in the next room will receive the audio.  My Harmon Kardon Go+Play does this and it has come in handy at gigs.  

Mixing board  --> hard wired into into 1st S1 --> APTX --> BT channel on 2nd S1

CityFolk
Collaborator
  • 272
  • 681
  • 2
Registered since

Jun 4, 2018

Re: S1 Pro system: Feature Requests and Suggestions

It would be nice to be able, using the connect app, to customize the mic and guitar built in ToneMatch settings.

While the existing ones are fine, if you have a guitar with a different kind of pickup other than a UST piezo or a different vocal mic, sure would be nice to select some others and override the default settings.

This may get complicated as we’d have to have a way for the app to tell us what the current preset is, then have it display a list of alternative settings that could be loaded in.  To keep things simple, I’d go with just updating the two settings and have that available for both channels 1 and 2.

Perhaps, also have the ability to reset these ToneMatch settings back to the default. 

colbysound
Member
  • 3
  • 3
  • 0
Registered since

Jun 22, 2018

Re: S1 Pro system: Feature Requests and Suggestions

Here's a list of what would help me as a live solo musician .

1. Master Volume

2. Line Out Volume

3. 3rd Channel w/ EQ + Reverb

4. S2 Pro with 8/10" Woofer and 4-6 Arrays  (I'd actually prefer an updated L1 Compact, battery powered with bluetooth, 3 channels and reverb.)

5. Bluetooth Pairing To 2 S1's . (this may be possible with the app?)

I've been using the S1 as a monitor for an acoustic solo act with line out to a PA speaker. This has eliminated the need for pedals or power at my feet on smaller gigs.  I'm excited to see what Bose comes up with next as I'm truly impressed with this speaker. Thanks for listening. 

ST - Pro
Professional Legend
  • 1419
  • 48121
  • 2
Registered since

May 11, 2020

Re: S1 Pro system: Feature Requests and Suggestions

Hi colbysound,

Thank you for joining the Bose Portable PA Community.

colbysound posted:
? - ? - ? - ? - ? - ? - ? - ? - ?

5. Bluetooth Pairing To 2 S1's . (this may be possible with the app?)

? - ? - ? - ? - ? - ? - ? - ? - ?

Yes, you can do that.

Please see: S1 Pro System Updates Version 7.0.10 June 2018

ST

BoseSTguy
Contributor
  • 5
  • 7
  • 0
Registered since

Dec 16, 2016

Re: S1 Pro system: Feature Requests and Suggestions

Starvin posted:

I would like to see a party mode/stereo mode app like they have for the

revolve + when connected to bluetooth. It would be a nice option to have a

bigger (than the Revolve+) Bose sound around camp fires , beach

parties, pool parties or just listening to a nice stereo mix in the living room.

This is now available. I used an S1 Pro and a Revolve+ in stereo mode last week. 

Ritzy
Member
  • 1
  • 3
  • 0
Registered since

Jul 9, 2018

Re: S1 Pro system: Feature Requests and Suggestions

ST posted:

Make S1 Pro capable of handling low end content as well as the L1 Compact.

The inspiration for this request is in @jdbassentertainment.com's discussion:

Bass over excursion or port noise - Turn Down For What?

Further to this: implementing a DSP (signal limiter and a subsonic filter @ 62Hz) to prevent excessive bass signals from being reproduced would be good. User configurable would be even better!

DJ JD BASS
Contributor
  • 144
  • 1989
  • 0
Registered since

Dec 22, 2008

Re: S1 Pro system: Feature Requests and Suggestions

Ritzy posted:
ST posted:

Make S1 Pro capable of handling low end content as well as the L1 Compact.

The inspiration for this request is in @jdbassentertainment.com's discussion:

Bass over excursion or port noise - Turn Down For What?

Further to this: implementing a DSP (signal limiter and a subsonic filter @ 62Hz) to prevent excessive bass signals from being reproduced would be good. User h the S1configurable would be even better!

Totally! As I see it this is the only thing that could be improved upon... Other than this small issue I am thrilled with my S1 Pros!

rory conway
Enthusiast
  • 13
  • 37
  • 0
Registered since

Jul 16, 2018

Re: S1 Pro system: Feature Requests and Suggestions

A mute channel switch, 

how about blue tooth, from one to another???   

for example guitar and vocals into one s1 pro,  then a blue tooth option to another s1 pro (send the info form one unit to another),  perhaps at the other end of a large room.

 

 

 

 

DJ_Postie
Member
  • 0
  • 16
  • 0
Registered since

Jul 16, 2018

Re: S1 Pro system: Feature Requests and Suggestions

TONEMATCH on chan 3 AUX-BT configured for BT and aux signals