cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
ST - Pro
Professional Legend
  • 1430
  • 48121
  • 3
Registered since

May 11, 2020

Solo - multi inputs - El Rancho Deluxe

Hi El Rancho Deluxe,

Thanks for using The Sketcher! Here is your Sketch.



-- click image to make changes to the live version --

Legend:
Orange numbers are Systems and Inputs using those Systems.
Blue ringed numbers are Channel connections to/from the Classic and Model I Systems.
Blue filled numbers are Channel connections to/from the T1 ToneMatch™ audio engine.
Green numbers are for general notes about the Sketch and connections to non-Bose gear.

Quoting elranchodeluxe from The Sketcher
quote:
1's : Guitar goes out to Aura, then to RC-50 Looper (4), then to Pickup input (2) on T-1.

2's: Vocal mic goes to VoiceLIve, then to RC-50 Looper (3), then to Vocal Input (1) on T-1.

T-1 feeds to L-1.

EQ is engaged on T-1 with Neuman preset and Breedlove Preset.

Aura has the closest match I could find to shape that tone.

Does this setup make sense?? Or is there a better way to hook it all up??
2 REPLIES 2
ST - Pro
Professional Legend
  • 1430
  • 48121
  • 3
Registered since

May 11, 2020

Re: Solo - multi inputs - El Rancho Deluxe

Hi El Rancho Deluxe,

Here is your revised Sketch.
I'm just running out to a gig. I'll have a look when I get back.



-- click image to make changes to the live version --

Legend:
Orange numbers are Systems and Inputs using those Systems.
Blue ringed numbers are Channel connections to/from the Classic and Model I Systems.
Blue filled numbers are Channel connections to/from the T1 ToneMatch™ audio engine.
Green numbers are for general notes about the Sketch and connections to non-Bose gear.

Quoting elranchodeluxe from The Sketcher
quote:
FWIW,
I did this before reading the color conventions, sorry.... Looking for some input regarding my current set up. IN the past, I fed th RC-50 into channels 4-5; but it ended up creating some undesired "chorusing," due to a slight delay introduced by the signal path. Had the same problem when I ran the VoiceLive as a send off the T-1. So, the current set up looks like this:


1's : Guitar goes out to Aura, then to RC-50 Looper (4), then to Pickup input (2) on T-1.

2's: Vocal mic goes to VoiceLIve, then to RC-50 Looper (3), then to Vocal Input (1) on T-1.

T-1 feeds to L-1.

EQ is engaged on T-1 with Neuman preset and Breedlove Preset.

Aura has the closest match I could find to shape that tone.

Does this setup make sense?? Or is there a better way to hook it all up??
elranchodeluxe
Member
  • 0
  • 41
  • 0
Registered since

Nov 9, 2005

Re: Solo - multi inputs - El Rancho Deluxe

There, I think I've modified it according to convention.


quote:
Originally posted by ST:
Hi El Rancho Deluxe,

Here is your revised Sketch.
I'm just running out to a gig. I'll have a look when I get back.



-- click image to make changes to the live version --

Legend:
Orange numbers are Systems and Inputs using those Systems.
Blue ringed numbers are Channel connections to/from the Classic and Model I Systems.
Blue filled numbers are Channel connections to/from the T1 ToneMatch™ audio engine.
Green numbers are for general notes about the Sketch and connections to non-Bose gear.

Quoting elranchodeluxe from The Sketcher
quote:
FWIW,
I did this before reading the color conventions, sorry.... Looking for some input regarding my current set up. IN the past, I fed th RC-50 into channels 4-5; but it ended up creating some undesired "chorusing," due to a slight delay introduced by the signal path. Had the same problem when I ran the VoiceLive as a send off the T-1. So, the current set up looks like this:


1's : Guitar goes out to Aura, then to RC-50 Looper (4), then to Pickup input (2) on T-1.

2's: Vocal mic goes to VoiceLIve, then to RC-50 Looper (3), then to Vocal Input (1) on T-1.

T-1 feeds to L-1.

EQ is engaged on T-1 with Neuman preset and Breedlove Preset.

Aura has the closest match I could find to shape that tone.

Does this setup make sense?? Or is there a better way to hook it all up??