Would it work to connect to ipads with a split cable to input 5/6? and can it be routed to a channel?
Or can usb input be used for one ipad and be routed to a channel ?
Edited title to facilitate searches: Previously "Input 5/6 T4S"
Hi benjo,
Thank you for joining the Bose Pro Portable Community.
Great questions!
benjo posted:Would it work to connect to ipads with a split cable to input 5/6?
Channel 5/6 is one channel with a dual input to support a stereo input that is added to the stereo master output buss.
You can connect a single iPad with a split cable.
and can it be routed to a channel?
Channel 5/6 cannot be reassigned to another channel. However, if you just need mono from the iPad, you can set the iPad output to mono and connect to any of the other channels.
Or can usb input be used for one ipad and be routed to a channel ?
You can route USB from PC to Aux In or Master. (corrected)
Does that help?
ST
Thanks for answer, i have to T1 today to make it stereo on the T1 input 5/6 are routed to channel 4 so i can use tones control this will not be possible on the new T4s? and is it posible to use lightning out on ipad to usb in on t4s.
Hi Benjo,
On T4S (5/6) and T8S (9/10) Aux Inputs, we cannot route them to different channels or Aux outputs. You can control Pan and Level sent through to Master. There's no other processing available (e.g. Presets, EQ, Effects).
I haven't had a chance to try the lightning out to Apple USB conversion to the T4S, but I expect it to work.
ST
ok, would be great to hear from you if you try it out.
By the way, I got the S1 pro yesterday good sound perfect for my use.
Hi benjo,
Congratulations.
Are you using Bluetooth to connect your iPad to the S1 Pro?
ST
No, i use it as monitor but maybe i will at som small job:-) have order the battery pack.
Hi again, i try to read owners manual i can’t seem to find that you can route usb from pc to a channel? But maybe i missed it. And are the one to four cannels stereo using a balansed jack?
Hi benjo,
You're right. I've corrected my previous post.
benjo posted:Hi again, i try to read owners manual i can’t seem to find that you can route usb from pc to a channel?
I'll be back later with a response to your second question.
ST