I have a pair of L1’s connected to a T8. If I power up the T8 after powering up the L1’s, there is a loud noise from the L1’s. In order to eliminate this, I must power on the L1’s last and power them down first to keep this loud noise from happening. It’s almost the same annoying noise you get when plugging in a guitar into a live amp.
Is is this normal?
May 11, 2020
Hi The Edge,
Normal - yes. Pleasant-no. But you may be able to alleviate this if you ensure that the Master Volume is OFF before you turn on the T8S.
Best practice is to turn on the power amp last when firing up your signal chain. Turn the power amp off first when shutting down.