Participant
  • 0
  • 3
  • 1
Registered since

Apr 14, 2020

T8S output to L1 Compact and S1 Pro Tone Match question

Before creating a new topic, please search the Community to avoid creating duplicate threads. If you are posting about a problem, the more of the below details you can include (if applicable) the easier it will be for others to try and help. Go to https://bose.life/2K1GbJl for a helpful post on how to find relevant information, including your firmware and app version information!

 

Bose product name

T8S 

 

Country

 

Firmware Version

 

App Version

 

What devices were you using that were affected and what version are they on (e.g. Samsung Galaxy S9 on Android 11, iPhone X on iOS14, etc.)

Detailed description of the issue and steps to reproduce

 

What environment do you experience the issue in? (e.g. noisy office, quiet kitchen, etc.)

 

When did you start to experience the issue? Did it work correctly previously?

 

Any troubleshooting steps you took

 

Just a couple or questions on the AUX OUTPUT of the T8S.
1. When the Tap Point is set to DRY, does that mean the if I were using a Tone Match preset on the channel, this too would not be passed on via Aux Output? I am planning on using my T8S, with the Tone Match turned on, using EQ and effects, sent to an L1 Compact, via Main Outs, then from the AUX 1, set to DRY, send a totally dry signal to an S1 Pro. So that my singer can set his own sound from scratch. Use his own TONE Match on the S1 Pro, or not. Let him have the option.

 

2. On the T8S, can I set Channel 1 to Aux 1, Dry then Channel 2 to Aux 2, Dry? When I set the Aux Output on a channel, they seem to be changing all the others channels to that Aux settings. 

 

Thanks!

 

 

1 REPLY 1
Moderator

Re: T8S output to L1 Compact and S1 Pro Tone Match question

Hey LorenO,

Thanks for your post!

 

  1. Setting Tap Point to 'Dry' would send the channel to the AUX output completely free of processing, including ToneMatch presets. It would just send the incoming signal unchanged.
  2. You can set different Tap Points for different AUX sends from the same channel, e.g.
    • CH1 - AUX1 - 'Dry'
    • CH1 - AUX2 - 'Post'

Hope this helps!

Feel more. Do more. Be more.
Come check out my profile here. New to the community? Check out the Getting Started board.
Help others find answers to your questions by clicking on 'Accept as Solution' at the bottom of a reply. If you see a post you like, make sure to give it a thumbs up!