Esparka
Participant
  • 2
  • 61
  • 0
Registered since

Sep 25, 2005

ToneMatch® Presets - Mono and Stereo

New discussion spun off from: Advice for new T8S ToneMatch User

Great question from Andy.  

ST, please elaborate.   Is there a specific location for the T8S presets/updates? So far, you stated that the T1 presets are compatible.  I understand that the T8S is stereo.  Would it not follow that for presets to be fully functional, the presets would be created with stereo functionality at the core? With T1 being mono, those presets would seem to be less than optimal. 

Thank you for your time, 

3 REPLIES 3
ST - Pro
Professional Legend
  • 1419
  • 48121
  • 2
Registered since

May 11, 2020

Re: ToneMatch® Presets - Mono and Stereo

Hi Sparks,

 My comments below apply equally to the T8S and T4S.

Esparka posted:

Great question from Andy.  

ST, please elaborate.   Is there a specific location for the T8 presets/updates?

No specific (separate) location for T4S/T8S ToneMatch® Presets.

They are all here: ToneMatch Preset Downloads

There is a separate location for firmware updates.



So far, you stated that the T1 presets are compatible.  

Yes, they are.

I understand that the T8 is stereo.  

The T8S (and T4S) are stereo.

Would it not follow that for presets to be fully functional, the presets would be created with stereo functionality at the core? With T1 being mono, those presets would seem to be less than optimal. 

The ToneMatch® Presets are optimized EQ curves. They are equally applicable in mono and stereo. 

Thank you for your time, 

Any time.



ST

ScubaBadger
Enthusiast
  • 68
  • 305
  • 0
Registered since

Sep 16, 2019

Re: ToneMatch® Presets - Mono and Stereo

If the T4S is a stereo unit and I replace my T1 desk with it, can I still run both channels (L&R) into one L1 mkll?

ST - Pro
Professional Legend
  • 1419
  • 48121
  • 2
Registered since

May 11, 2020

Re: ToneMatch® Presets - Mono and Stereo

Hi ScubaBadger,

Great question!

Update/Correction

T4S ToneMatch® mixer

Pan all inputs hard RIGHT

Connect your L1® to the RIGHT ToneMatch® port

OR

Use the ¼ inch (6mm) Right Output to a powered loudspeaker (e.g. S1 Pro, L1® Compact, F1 Model 812). For best results use a ¼ inch (6mm) jack Tip-Ring-Sleeve  cable.

T8S ToneMatch® mixer

Pan all inputs hard RIGHT

Use the ¼ inch (6mm) Right Output to a powered loudspeaker (e.g. S1 Pro, L1® Compact, F1 Model 812). For best results use a ¼ inch (6mm) jack Tip-Ring-Sleeve  cable

OR

Use the XLR Right Output to powered a loudspeaker (e.g. S1 Pro, F1 Model 812). or L1® Compact with XLR to ¼ inch (6mm) jack Tip-Ring-Sleeve.


Here's more information: T4S/T8S ToneMatch® Mixers

ST