Re: Volume level for Microphone
@Chet You hit the nail on the head! I went with ch.1 on the S1 only because I had a TRS cable right next to me and was too lazy to go look for another. Also, I had my T8S plugged into ch.2 of the S1 and was too lazy to remove that.
I figured it would be easier to pan hard right since it was just an experiment with hooking up the 1002B.
It might be an interesting experiment to hook up the vocals (panned one way) to one channel of the S1 using the TRS cable and try panning the guitar the other way and use a TS (unbalanced) guitar cord from the other channel of the mixer to channel 2 of the S1 with just the guitar signal.
See if you can get enough guitar level to match the vocal level by doing that.
Again, gain staging is important or as I learned it "Signal Path" -- making and following your gain settings from the source to final destination.