cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
mhs
Member
  • 0
  • 4
  • 0
Registered since

Apr 9, 2012

linking 2 L1 model II systems

7 members in band...2 L1 model II with 2 B1s each. Often by necessity we end up with one tower at the far end of the stage away from the other. At high volumes we sometimes have trouble hearing from one side to the other. Can i send an Aux out from unit #1 to the "line in" on unit #2? And do the same the other way.. send aux from #2 to "line in" on unit #1? In theory that would send the signal from the left to the right and vice versa...share the inputs form one side to the other.....will that work ? will it hurt anything???
1 REPLY 1
Julio_A
Moderator - Retired
  • 0
  • 69
  • 0
Registered since

Mar 5, 2019

Re: linking 2 L1 model II systems

Hello mhs,

Thank you for your post. Yes this will work but you would want to use the master outputs not the aux. This will make sure that all effects and setting will be heard in the second system. This one tricky part about this setup is making sure the trim knobs are set properly so the volume of audio matches.

Hope this helps,