We currently have 2 L1 model II with 2 B1s each. 7 members in the band. Often when we get on certain stages and the towers are farther apart (by necessity)one side of the stage has a difficult time picking up the other tower. Usually i have 3 vocals and a guitar in ones tower and 2 vocals and guitar and percussion (congas/ bongos) in the other. Can I send an Aux signal from one unit to the other and vice versa? In other words send the vocals from #1 via Aux to the line in on #2. Also send the vocals from #2 to the line in on #1??
Thank you for your post. Yes this will work but you would want to use the master outputs not the aux. This will make sure that all effects and setting will be heard in the second system. This one tricky part about this setup is making sure the trim knobs are set properly so the volume of audio matches.