Andy_B
Community Manager

SoundLink Revolve and SoundLink Revolve Plus Firmware Update - 3.1.1 - February 16th

On Tuesday, February 16th, 2021 a new firmware update will be available for our SoundLink Revolve and SoundLink Revolve Plus series of speakers. These updates will be available on the btu.bose.com site and over-the-air via the Bose Connect App.

 

Firmware Version Number:

  • 3.1.1

 

Release Notes:

  • Improvements to phone call routing and audio when using the speaker for phone calls
  • Fixed bugs and did some general cleaning under the hood
Feel more. Do more. Be more.
Come check out my profile here. New to the community? Check out the Getting Started board.
Help others find answers to your questions by clicking on 'Accept as Solution' at the bottom of a reply.
If you see a post you like, make sure to give it a thumbs up!
16 REPLIES 16
Nuvz
Participant
  • 0
  • 1
  • 0
Registered since

Feb 16, 2021

Re: SoundLink Revolve and SoundLink Revolve Plus Firmware Update - 3.1.1 - February 16th

Thanks for the info I just updated my 2 SoundLink Revolve and both udpates went fine.

I noted that you have to disconnect USB and switch it back again after the update.

They both sound to work normally and not side effects noted.

 

 

 

 

ericdom3
Participant
  • 0
  • 1
  • 0
Registered since

Feb 17, 2021

Re: SoundLink Revolve and SoundLink Revolve Plus Firmware Update - 3.1.1 - February 16th

Hello just updated from 3.0.4 and it seems the bass doesn’t sound as full compared to before the update. 

nirmal3181@gmail.com
Participant
  • 1
  • 1
  • 0
Registered since

Feb 18, 2021

Re: SoundLink Revolve and SoundLink Revolve Plus Firmware Update - 3.1.1 - February 16th

  • Bass response is surprisingly reduced in this latest firmware update (3.1.1).
Cp488
Participant
  • 0
  • 1
  • 0
Registered since

Feb 18, 2021

Re: SoundLink Revolve and SoundLink Revolve Plus Firmware Update - 3.1.1 - February 16th

I have updated my Soundlink Revolve and performed all restarts, reboots and quick fixes suggested but my unit still flashes orange constantly when plugged in (with original Bose charger that works on other devices) and will not turn on or do anything else!  It was working fine when last used and then it has sat unused for 2 months.  Now it is dead!! Please help. 

Spetznaz_10
Participant
  • 0
  • 1
  • 0
Registered since

Feb 18, 2021

Re: SoundLink Revolve and SoundLink Revolve Plus Firmware Update - 3.1.1 - February 16th

A quick tutorial on how to fix the flashing/blinking red light issue on Bose Soundlink Revolve bluetooth speaker in 2020. If you find this helpful, please su...
dscrlc
Contributor
  • 3
  • 5
  • 0
Registered since

Feb 9, 2018

Re: SoundLink Revolve and SoundLink Revolve Plus Firmware Update - 3.1.1 - February 16th

what did the firmware do to my revolve+!!  there has no BASS at all, even i use ViPERFX to boost it~~

 

How can I make it roll back to the previous version??

 

What are you planning? Why deliberately reduce performance?

paul rueda
Participant
  • 0
  • 2
  • 0
Registered since

Apr 15, 2020

Re: SoundLink Revolve and SoundLink Revolve Plus Firmware Update - 3.1.1 - February 16th

In my case, the sound is sharper. The highs and mids are clear. Certainly the basses are less deep. However, it used to distort at high volume. Sounds like a good update to me.

Lampi1986
Participant
  • 0
  • 2
  • 0
Registered since

Feb 22, 2021

Re: SoundLink Revolve and SoundLink Revolve Plus Firmware Update - 3.1.1 - February 16th

Good morning,

 

Afer the firmware update (done via the Bose APP) on Friday 26/02/2021, My speaker went dead!

No lights, not charging (using the original charger and cable), no bluetooth on, nothing... dead...

the only working thing is the NFC. The speaker connects via my phone, bu no sound, no lights indicationg that it is on, basically connected but not on.

Please inform on what to do (the speaker is less than 6 months

 

Thank you 

Flupk
Contributor
  • 0
  • 7
  • 0
Registered since

Sep 13, 2019

Re: SoundLink Revolve and SoundLink Revolve Plus Firmware Update - 3.1.1 - February 16th

I seamlessly upgraded two Revolve SoundLink first-generation to 3.1.1

I did it from IOS app, with the speaker only connected to one device and power-plugged. At some point of time (when the 5-minutes update process itself is initiated) the device seems "off" but it isn't: give it 5 minutes to complete.

The tone is maybe slightly different (more high frequencies) but I don't find this problematic at all (no lack of bass imho)