Highlighted
Quiet Contributor
  • 1
  • 2
  • 0
Registered since

Sep 9, 2019

bose soundlink revolve firmware 3.0.4 sound base drop

Affter update bose soundlink revolve to firmware 3.0.4  and reset it

base is less than firmware 1.5.0 

noway to downgrade to 1.5.0

 

i hope next firmware sound base will came more than  3.0.4  

 

5 REPLIES 5
Highlighted
Moderator

Re: bose soundlink revolve firmware 3.0.4 sound base drop

Hello Banmai,

 

Thanks for writing to the community. 

 

I am very sorry to hear that you are experiencing some issues with the Bass response of your SoundLink Revolve Speaker. 

 

Can you confirm that you performed a reset by the following instruction.

  • Disconnect the power cord
  • Power on your product using battery power
  • Press and hold the Multi-function (•○•) button for 10 seconds until the product lights glow.

 

Have you recently moved your speaker to a new location which could potentially impact the Bass response of your product?

 

Please let us know. 

 

Kind regards,

Tegan M - Community Support 

Feel more. Do more. Be more.
New to the community? Check out our Community Guidelines and How to use the Bose Community for helpful hints on getting started.
Highlighted
Quiet Contributor
  • 1
  • 5
  • 0
Registered since

Sep 6, 2019

Re: bose soundlink revolve firmware 3.0.4 sound base drop

I'm experiencing the same issue. Definately a reduction in bass with the latest firmware udpate. It seems like Bose possibly tried to improve sound quality for phone calls (maybe by reducing bass) but these changes have had a big impact on music playback. If that was the intent, they need to have two seperate audio profiles, one for music playback and one for conference/phone calls.

Highlighted
Audible Advocate
  • 1
  • 15
  • 0
Registered since

Sep 7, 2019

Re: bose soundlink revolve firmware 3.0.4 sound base drop

Try a 'Master Reset' by pressing and holding down the power button for approximately 10 seconds.

This worked for me, the bass and richness of sound is back, actually sounds better than before the firmware update 🙂

Highlighted
Friendly Fanatic
  • 4
  • 13
  • 0
Registered since

Sep 2, 2019

Re: bose soundlink revolve firmware 3.0.4 sound base drop

it does not help to reset... 
Bass is better than before the reset, but sound is terrible in direct comparsion to 1.5 FW

Highlighted
Quiet Contributor
  • 0
  • 2
  • 0
Registered since

Apr 23, 2020

Re: bose soundlink revolve firmware 3.0.4 sound base drop

Hello,

 

I have Bose Revolve Plus as well and it sound worst on the base after the firmware update to 3.0.4 now. The rich deep base sound is no longer happen. I did perform the 10 second reset as you provide below but it does not help. Can we reverse the update in anyway. Please help and relate this to your R&D if a another new update is possible?

 

Sai,