Anders-at-Bose
Member
  • 1
  • 15
  • 0
Registered since

May 10, 2009

Alarm log

Hi

We have a installation there a couple of PM is in FAULT sometimes.
After restart of the PM it's work again untill next time it happen (a couple of days).
I check the alarm log and the code is " FAULT:ADS7830(PS)2c err".
Do anyone now what it means?

Regards
Anders
1 REPLY 1
Kyle
Contributor
  • 3
  • 1138
  • 0
Registered since

Feb 13, 2017

Re: Alarm log

Hi Anders,
It sounds like multiple amps were showing this same error?

I would recommend replacements. PowerMatch amplifiers are under Global Rapid Response through March of 2013 so please return the amp through the proper channels so it can get back here for analysis. Please submit a Front Door issue as well so that we can track this. Feel free to reference this post in the issue description.

When you get the new amps, please ensure the latest firmware (1.153) is on there. If you have any other details about the loudspeaker loads/CSD files, please email us those directly.

Thanks,
Kyle