cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
nettemravi
Participant
  • 0
  • 2
  • 0
Registered since

Sep 30, 2019

CC-1D Update is failing every time

CC-1D Update is failing every time when I am doing through CSD 5.8 version .

CC1d is connected over POE near to switch .

Can somebody guide for any  configuration settings .

3 REPLIES 3
ChrisJ-at-Bose
Moderator

Re: CC-1D Update is failing every time

Hi Nettemravi,

 

What is the failure message that it gives you? 

If you're using DHCP and a DHCP server, try setting this to a static IP, and set the PC network card to the same static range. Then try updating.

The other possibility is that you have a firewall that is blocking the ports used for updates. Please turn any firewall off during this process. 

 

Thanks,

 

ChrisJ-at-Bose

nettemravi
Participant
  • 0
  • 2
  • 0
Registered since

Sep 30, 2019

Re: CC-1D Update is failing every time

Hi Chris ,

 

I can able to change ip address ,IP Address is static only and Laptop is also in same series .

It is showing - error 18 while doing firmware update  .IMG-20211007-WA0000.jpg

 

Thanks 

Ravi .

ru@avecom.fr
Contributor
  • 2
  • 28
  • 0
Registered since

May 16, 2013

Re: CC-1D Update is failing every time

Hello,

 

I had this same issue.

This helped for me:

- Connect your pc + cc1 only to a small POE switch

- update the via the Bose discovery tool (not CS designer)

- set the IP adress if needed

 

Then it will work fine, you can put it back on the controlspace network