Highlighted
Member
  • 1
  • 6
  • 0
Registered since

Jul 20, 2019

Controlspace remote on iphone

Hi,can i use the controlspace remote from an iphone to bose PM8250N?Thank u

7 REPLIES 7
Highlighted
Bose Employee
  • 85
  • 1288
  • 13
Registered since

Oct 27, 2017

Re: Controlspace remote on iphone

Hello Claus,

Thank you for contacting us.

Yes, as long as the PM8250N (networked) is on a WiFi network, you should be able to control the output volume and the matrix (by programming Parameter sets).

Please use Bose ControlSpace Designer to configure the PM8250N and use Bose ControlSpace Remote builder to create the design for the iPhone.
And download Bose ControlSpace Remote custom from the Apple store.

BR
Arno

Highlighted
Member
  • 1
  • 6
  • 0
Registered since

Jul 20, 2019

Re: Controlspace remote on iphone

Thank u for prompt answer

Highlighted
Member
  • 1
  • 6
  • 0
Registered since

Jul 20, 2019

Re: Controlspace remote on iphone

Hi again,how to set the bose pm8250N amplifier in stanby mode ,(when the audio source is no longer play music)?Must to set from CSD or front panel?Thank u and best regards

Highlighted
Moderator - Retired
  • 0
  • 281
  • 0
Registered since

Jan 24, 2017

Re: Controlspace remote on iphone

Hi Claus,

If you would like to be able to toggle standby mode from the ControlSpace Remote app, you can accomplish this with parameter sets.

In your ControlSpace Designer design file, right click on the PowerMatch and select "Toggle Standby", then drag the entire PM block into a parameter set.  Then Toggle Standby again and drag the PM block into a different parameter set.

In Remote Builder, you can drag these parameter sets onto the canvas as buttons, or you can use the ParameterList to create a drop down list.

 

Nick

Highlighted
Member
  • 1
  • 6
  • 0
Registered since

Jul 20, 2019

Re: Controlspace remote on iphone

Hi,can i use on control space processor ESP 88C the control space remote from a device?(iphone for example)Thank u

Highlighted
Moderator - Retired
  • 0
  • 281
  • 0
Registered since

Jan 24, 2017

Re: Controlspace remote on iphone

Hello Claus,

Yes, you can control an ESP-88C from a mobile device/tablet via the ControlSpace Remote app.  

Once you build your ControlSpace Designer file containing the ESP and PowerMatch, you will be able to load the design file into a ControlSpace Remote Builder application.  

Highlighted
Member
  • 1
  • 6
  • 0
Registered since

Jul 20, 2019

Re: Controlspace remote on iphone

Thank u