cancel
Showing results for 
Search instead for 
Did you mean: 
Notice
Welcome to the Bose Professional Installed Community!

This is a community for Bose dealers and installers who work with our installed products like conferencing ControlSpace EX and touring products like Bose ShowMatch DeltaQ loudspeakers.

The Bose Community for Bose speakers, headphones, audio sunglasses and more is no longer available. If you need assistance with other Bose products, such as the Quiet Comfort Earbuds, Soundbar 900, QuietComfort 45, etc., please visit our support site. Please note that threads created for non-Bose Professional products will be removed.

Thanks for your understanding!
cancel
Showing results for 
Search instead for 
Did you mean: 
Navin Datta
Participant
  • 0
  • 3
  • 0
Registered since

Apr 15, 2021

EDID Info on VB-1

Before creating a new topic, please search the Community to avoid creating duplicate threads. If you are posting about a problem, the more of the below details you can include (if applicable) the easier it will be for others to try and help. Go to https://bose.life/2K1GbJl for a helpful post on how to find relevant information, including your firmware and app version information!

 

Bose product name

VB-1

Country

India

Firmware Version

 

App Version

 

What devices were you using that were affected and what version are they on (e.g. Samsung Galaxy S9 on Android 11, iPhone X on iOS14, etc.)

Detailed description of the issue and steps to reproduce

During one of the meeting with the consultant for a large opportunity for Bose VB-1, I was asked, "how does VB-1 manages EDID, as in single cable mode, VB-1 is talking to display directly" Can someone please help me with the relevant information on this..

 

What environment do you experience the issue in? (e.g. noisy office, quiet kitchen, etc.)

 

When did you start to experience the issue? Did it work correctly previously?

 

Any troubleshooting steps you took

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
ChrisJ-at-Bose
Moderator

Re: EDID Info on VB-1

Author Accepted Answer selected by Navin Datta

Hi Navin,

 

EDID is between the PC/Mac and the monitor. Our VB1 is just using DisplayLink similar to the way a dock would use it. It's just passing this information between the source (PC) and display. 

 

Thanks,

 

ChrisJ-at-Bose

View solution in original post

3 REPLIES 3
ChrisJ-at-Bose
Moderator

Re: EDID Info on VB-1

Author Accepted Answer selected by Navin Datta

Hi Navin,

 

EDID is between the PC/Mac and the monitor. Our VB1 is just using DisplayLink similar to the way a dock would use it. It's just passing this information between the source (PC) and display. 

 

Thanks,

 

ChrisJ-at-Bose

View solution in original post

Navin Datta
Participant
  • 0
  • 3
  • 0
Registered since

Apr 15, 2021

Bose work management application, over VLAN

Hi, One of the partner has two different VLANs setup in their office. One for all AV devices (VB-1 is part of that) and another one is for general purpose use. IT manager wants to check the status of VB_1 from his machine, using Bose WMS. Are there any special settings need to be done to reach out to VB-1, sitting on a separate VLAN?

BR 

 

Navin Datta

ChrisJ-at-Bose
Moderator

Re: Bose work management application, over VLAN

Hi Navin,

 

It should just be like any other IP device. The network VLAN would have to be configured (port forwarding or bridging) to be able to see and communicate between networks. An IT manager should know the proper way to set this up securely. Otherwise, you can connect the VB1 to the larger network to connect to Work Management. 

 

ChrisJ-at-Bose