Highlighted
Member
  • 0
  • 3
  • 0
Registered since

Nov 23, 2019

Problems with 2 ESP1240A

Hello,

 

yesterday we installed at a customer. There are about 40 speakers and 5 Amp 604 A , 1 x CC64 and 2 x ESP1240A.It is a simple installation. When loading the software onto the devices, the POWER LEDs of the two ESP alternately went red. At first we thought that there was a hardware problem. But when we had the software with the older version on it, then the second ESP went to red and the first to green. We are using the 5.7 CSD because of the PS604A. I think that there is no hardware problem - its the software.If we play an empty file on it, all LEDs are green. As soon as I play the file with the CSD version 5.7, the LED turns red.How do I solve this problem? We installed 2 amps via AMPLINK on the processor and the last AMP via Anaog. All devices (including the CC64) are on one switch.

 

Thanks for Helping

DJ

4 REPLIES 4
Highlighted
Bose Employee
  • 78
  • 1230
  • 4
Registered since

Oct 27, 2017

Re: Problems with 2 ESP1240A

Hello DJ,

Sorry you run into this issue.
Is sounds like a "netlist" error.

Can you share your design file (add it to this post or send me a private message), so I can investigate this further?

Thank you in advance.

BR

Arno

Highlighted
Member
  • 0
  • 3
  • 0
Registered since

Nov 23, 2019

Re: Problems with 2 ESP1240A

Hallo Arno, i will sent you the file in a few minutes

Highlighted
Member
  • 0
  • 3
  • 0
Registered since

Nov 23, 2019

Re: Problems with 2 ESP1240A

Thanks for your help ; )

Highlighted
Bose Employee
  • 78
  • 1230
  • 4
Registered since

Oct 27, 2017

Re: Problems with 2 ESP1240A

Hi Heike,
Thank you for the time you spent on this.

It turns out that there is an issue assigning a CC-64 to a Pset in CSD 5.7.

We have backlogged this issue.

BR
Arno