Notice

The Bose Community Forum was launched at a time when robust online support was not available for Bose customers. Over the past several years we have added new online service channels that provide a more interactive and complete digital experience. Additionally, we have enhanced the My Bose Account capabilities to deliver a more personalized and self-service experience. As a result, Bose has made the decision to close Community Forum for Consumer electronics products on September 30th. The Bose Pro portion of the Community will still operate as usual.


Please visit our support homepage to experience one of our many other digital service channels or simply use your Community log-in credentials to sign in to your My Bose Account to view your orders and view support options.


Thank you to all who have contributed and benefited from interacting in our Community. We look forward to continuing to serve you online.


Regards,
Bose Customer Service Team
cancel
Showing results for 
Search instead for 
Did you mean: 
JeffAlex21
Contributor
  • 1
  • 24
  • 0
Registered since

Aug 2, 2018

Remote App Network Performance with Dante

Hey Guys,

We deploy CS Systems over enterprise networks with VLANs and SSIDs set up for the audio system. We never experienced any significant lag in control when using the ESP00, but when that was discontinued we switched to Dante to get the distribution capability we needed. 

Since switching to Dante we are noticing lagged behavior with the remote control apps. Is this a result of having remote control and Dante distribution on the same network or is there something else we should check?

Thanks!!

5 REPLIES 5
arno-at-bose
Moderator - Retired
  • 12
  • 1310
  • 20
Registered since

Oct 27, 2017

Re: Remote App Network Performance with Dante

Hello JeffAlex,

I haven't heard on CSR control lag.

Dante multicast flows can flood the WiFi link.
Audinate wrote an article on this.

For testing, you might can try to isolate Dante and CSD control by selecting Isolated mode for the Dante network mode.
On the primary port you will have Dante and on the secondary port CSD control.

Or build a small network and see if you still experiencing this issue.

Do you also experiencing this issue when you use CSR on a wired PC?

I hope this will help you resolving your issue, otherwise please let us know.

BR
Arno

JeffAlex21
Contributor
  • 1
  • 24
  • 0
Registered since

Aug 2, 2018

Re: Remote App Network Performance with Dante

Thanks Arno... our network team is checking further

JeffAlex21
Contributor
  • 1
  • 24
  • 0
Registered since

Aug 2, 2018

Re: Remote App Network Performance with Dante

Arno, to pick up on where we left off... our network team seems to think that since we deploy CS Systems with music streaming constantly over Dante to 3 PM8250 amps and 24 zones, that remote control traffic over the same ethernet connection is not getting priority, therefore lagging.

In your response on 1/7 you suggested isolating the two traffic streams. I assume that this is performed in Dante Controller here...attachment

Are the rest of the steps for CSD and CS Remote builder documented?

Thanks!!Framingham Dante Deployment

arno-at-bose
Moderator - Retired
  • 12
  • 1310
  • 20
Registered since

Oct 27, 2017

Re: Remote App Network Performance with Dante

solating Dante and control can be done in Dante Controller:

  • Go to Device Info
  • double click on the Dante device
  • click on the Network Config tab and select Isolated_Networks under Switch Configuration 
  • A notification window will pop-up and select Yes
  • Reboot the unit

You have to do this for all Dante devices and you have to create 2 networks (Dante / Control)

BR
Arno

JeffAlex21
Contributor
  • 1
  • 24
  • 0
Registered since

Aug 2, 2018

Re: Remote App Network Performance with Dante

Thanks Arno!