wp22bu-d firmware update.

[Masroor]

Hello,

I am facing one small issue for firmware version to update.

Esp 880 AD I have already updated with latest version 4.0.9.1.

Wp22bu-d i have 6 pic with Dante version 3.10.3.1

How i can update to same version as both the devices and not communicating with each other.

All wp22bud found in project view also it sowing connected but no signal in input side.

Please help me 

Thank you 

[arno-at-bose · Accepted solution]

Hello Masroor, 

The latest version are:

You can update the units using fum.exe which can be found in the following folder:
C:\Program Files (x86)\Bose\ControlSpace 5.8

I've just tested the audio routing using the latest Dante firmware and it works as expected.

BR
Arno

[Masroor]

Hello Arno,

Thank you for your support and its really works.

Just i found the updated dante version 3.10.3.1 and in your file its 3.10.4.1 but its working now.

One more help i need please .

I have a azan prayer and i have used ducker how can we hold the main signal during entire azan period.

its ducking but main signal is also coming in between can we hold the main signal during all azan time.

Can you support me to set the parameters inside ducker for azan to hold the main signal and return slowly after finished azan.

Spoiler

Spoiler

please see the attached picture.

[arno-at-bose]

Hello Masroor,
Good to read your Dante audio issue is resolved.

On the ducker, can you share me your design so I have a better overview how you programmed it.
If you connect the Azan prayer to the side-chain input of the ducker it should mute the normal audio for the hold period.

BR
Arno

[Masroor]

Dear Arno,

Please find the link below.

https://wetransfer.com/downloads/93b2bfd16ce7b2004d97636371bcf24420201120130724/6c374d6458d45bc37830... 

[arno-at-bose]

Hello Masroor,

Sorry but the wetransfer link doesn't work for me.
Can you check and update the link?

Thank you in advance.

BR
Arno

[Masroor]

please try this link.

https://wetransfer.com/downloads/9c91e4fb600b525a9b37ed90770503a620201121081609/bfd7f37f6260674ab107... 

[arno-at-bose]

Hello Masroor,

I think you need a longer hold time (>1000ms).

Can you try to add a Gate and a Sine Generator to the Ducker side chain?
The Ducker hold time will change by changing the Gate Decay time
Please use this [LINK] to download an example file including some example settings.

[Masroor]

Hello Arno,

Really  appreciate your support.

Thank you very much for your full support .

The system is working fine with no any issue all problems solve.

[arno-at-bose]

Hello Masroor,

Thank you for you update.

BR
Arno