Quiet Contributor
  • 0
  • 5
  • 0
Registered since

Feb 16, 2018

Need Satellite Receiver Code for Remote Control setup

My provider is Sky Italia decoder is My Sky HD manufacturer Humax model ESi - 160. Code 01200 does not work, I have tried many times without success. The code in the manual for Sky Italia does not work either, as a matter of fact, when I enter the code the 6 source lights on remote blinks 3 times. Any help would be much appreciated

6 REPLIES 6
Highlighted
Moderator - Retired
  • 0
  • 1641
  • 93
Registered since

Dec 5, 2016

Re: Need Satellite Receiver Code for Remote Control setup

Hi kights,

 

Thank you for your post. I'm sorry to hear about the remote programming issue you are experiencing. Curiously, which Bose system are you using? Many of our systems use different programming codes, so we will need to know which system you are working with to assist further. 

 

Thank you,

 

Brian - Bose Support

Highlighted
Quiet Contributor
  • 0
  • 5
  • 0
Registered since

Feb 16, 2018

Re: Need Satellite Receiver Code for Remote Control setup

I am using the Bose SoundTouch 300.
Highlighted
Quiet Contributor
  • 0
  • 5
  • 0
Registered since

Feb 16, 2018

Re: Need Satellite Receiver Code for Remote Control setup

Soundtouch 300
Highlighted
Moderator - Retired
  • 0
  • 5748
  • 294
Registered since

Dec 5, 2016

Re: Need Satellite Receiver Code for Remote Control setup

Hi kights,

 

Thanks for the info.

 

Was your system purchased in Italy, or elsewhere outside of the country?

 

Is this the code that is included with the SoundTouch booklet?

 

Thanks,

Brandon - Bose Support

Highlighted
Quiet Contributor
  • 0
  • 5
  • 0
Registered since

Feb 16, 2018

Re: Need Satellite Receiver Code for Remote Control setup

I purchased it in the U.S.. the codes I used are from the booklet and the Bose Community.
Highlighted
Moderator - Retired
  • 0
  • 5748
  • 294
Registered since

Dec 5, 2016

Re: Need Satellite Receiver Code for Remote Control setup

Hi kights,

 

Thank you for the information.  Since the system was purchased in the US, it is going to have the US/North America codes programmed in.  You will need to purchase an EU version of the remote control in order to control the Sky Italia STB.  When the source lights blink three times after entering a code, that means that the code is invalid and does not exist on the remote.

 

You can contact Bose IT support at 02-3206 0600 to place an order for a new remote control.  

 

If you have any other questions, please let me know.

 

Best Regards,

Brandon