Shaypo
Participant
  • 0
  • 1
  • 0
Registered since

Apr 21, 2017

Setting/cancelling an alarm clock set on the wave soundtouch

How do i cancel an alarm set on the wave soundtouch?

Thank you

1 ACCEPTED SOLUTION

Accepted Solutions
Michael_F
Moderator - Retired
  • 0
  • 1036
  • 82
Registered since

Sep 25, 2014

Re: Setting/cancelling an alarm clock set on the wave soundtouch

Bose Best Answer selected by Moderator Charlotte_G

Hi Ellie39,

 

Here are the instructions on how to set an alarm on the Wave SoundTouch:

  1. On the remote, press Alarm Setup to activate the Alarm Setup mode and display the settings for Alarm 1. The current alarm 1 time setting will appear in the center of the display and flash above the SET icon on the right side of the display
    1. If no adjustments are made within 10 seconds, the system automatically exits the Alarm Setup mode
    2. If -SETUP MENU- displays, the Alarm Time button is being held down for too long
  2. Press Time – or Time + to set the alarm time. Be sure to notice the AM and PM designations (for systems set to display the time in the 12-hour format)
  3. Select one of the following sources to play when the alarm sounds:
    1. To hear the radio, press Radio and select a preset
    2. To hear a CD, press CD and select a track number
    3. To hear a SoundTouch preset, press SoundTouch icon and select a preset number (Note: If the selected SoundTouch preset is unavailable when the alarm sounds, the buzzer sound is used instead)
    4. To hear the buzzer, which is the default setting, press Sleep (Buzzer)
      Sources connected via AUX or Blueooth cannot be selected as an alarm source
  4. Press Volume up or Volume down to set the volume level desired when the alarm sounds
  5. Press Alarm Setup again to display the settings for Alarm 2. The current alarm 2 time setting will appear in the center of the display and flash below the SET icon
  6. Repeat steps 2 through 4 to change the Alarm 2 settings
  7. Press Alarm Setup again to leave the setup mode. If any changes were made to an alarm, the alarm number and time will appear on the right side of the display, which indicates that the alarm is on

 

To turn Alarm 1 on or off:

  • In the Alarms section at the bottom of the remote, press the 1 button to turn alarm 1 on or off
  • Alarm 1 is on when a time with a 1 icon next to it appears on the right side of the display

To turn Alarm 2 on or off:

  • In the Alarms section at the bottom of the remote, press the 2 button to turn alarm 2 on or off
  • Alarm 2 is on when a time with a 2 icon next to it appears on the right side of the display

 

Let us know if that helps clear up your questions! Thanks!

View solution in original post

7 REPLIES 7
Brent_B
Moderator - Retired
  • 0
  • 4188
  • 227
Registered since

May 16, 2016

Re: Setting/cancelling an alarm clock set on the wave soundtouch

Hi Shaypo, 

 

If you press either "Alarm 1" or "Alarm 2" at the bottom of the remote, it should disable the corresponding alarm. 

 

Thank you 

Ellie39
Participant
  • 0
  • 2
  • 0
Registered since

Jul 13, 2017

Re: Setting/cancelling an alarm clock set on the wave soundtouch

How do I turn off an alarm?

 

Ellie39
Participant
  • 0
  • 2
  • 0
Registered since

Jul 13, 2017

Re: Setting/cancelling an alarm clock set on the wave soundtouch

How do you set an alarm?

 

Michael_F
Moderator - Retired
  • 0
  • 1036
  • 82
Registered since

Sep 25, 2014

Re: Setting/cancelling an alarm clock set on the wave soundtouch

Bose Best Answer selected by Moderator Charlotte_G

Hi Ellie39,

 

Here are the instructions on how to set an alarm on the Wave SoundTouch:

  1. On the remote, press Alarm Setup to activate the Alarm Setup mode and display the settings for Alarm 1. The current alarm 1 time setting will appear in the center of the display and flash above the SET icon on the right side of the display
    1. If no adjustments are made within 10 seconds, the system automatically exits the Alarm Setup mode
    2. If -SETUP MENU- displays, the Alarm Time button is being held down for too long
  2. Press Time – or Time + to set the alarm time. Be sure to notice the AM and PM designations (for systems set to display the time in the 12-hour format)
  3. Select one of the following sources to play when the alarm sounds:
    1. To hear the radio, press Radio and select a preset
    2. To hear a CD, press CD and select a track number
    3. To hear a SoundTouch preset, press SoundTouch icon and select a preset number (Note: If the selected SoundTouch preset is unavailable when the alarm sounds, the buzzer sound is used instead)
    4. To hear the buzzer, which is the default setting, press Sleep (Buzzer)
      Sources connected via AUX or Blueooth cannot be selected as an alarm source
  4. Press Volume up or Volume down to set the volume level desired when the alarm sounds
  5. Press Alarm Setup again to display the settings for Alarm 2. The current alarm 2 time setting will appear in the center of the display and flash below the SET icon
  6. Repeat steps 2 through 4 to change the Alarm 2 settings
  7. Press Alarm Setup again to leave the setup mode. If any changes were made to an alarm, the alarm number and time will appear on the right side of the display, which indicates that the alarm is on

 

To turn Alarm 1 on or off:

  • In the Alarms section at the bottom of the remote, press the 1 button to turn alarm 1 on or off
  • Alarm 1 is on when a time with a 1 icon next to it appears on the right side of the display

To turn Alarm 2 on or off:

  • In the Alarms section at the bottom of the remote, press the 2 button to turn alarm 2 on or off
  • Alarm 2 is on when a time with a 2 icon next to it appears on the right side of the display

 

Let us know if that helps clear up your questions! Thanks!

View solution in original post

hartofak
Participant
  • 0
  • 2
  • 0
Registered since

Nov 17, 2016

Re: Setting/cancelling an alarm clock set on the wave soundtouch

In my case, I never meant to set an alarm in the first place. How do I disable it permanently?
Bose Wave SoundTouch
Thanks.

Gabeben
Participant
  • 0
  • 1
  • 0
Registered since

Dec 15, 2017

Re: Setting/cancelling an alarm clock set on the wave soundtouch

How do I cancel alarm settings

Brian_M
Moderator - Retired
  • 0
  • 1640
  • 96
Registered since

Dec 5, 2016

Re: Setting/cancelling an alarm clock set on the wave soundtouch

Hello Gabeben,

 

Thank you for your inquiry. Please try the steps I've listed above in this thread, and let us know if they help!

 

Best regards,

 

Brian