After the recent firmware update, the way my soundbar 300 connects to the base module has
changed. Despite the Bass Module toggle ON under Advanced Setup/Speaker Selection, I don't
get the sound from the bass module. And if set the toggle OFF, I get the sound from bass module.
Is this some kinda tweak in the recent Soundtouch app update or so should I use the toggle
differently..? The logic is questioned by my kids!!!
Appreciate any plausible explanation please.
Thanks for reaching out, sorry that you are having some issues with connecting your bass module.
Can you confirm the LED status of your speaker when you have the bass module toggled to on?
Do let us know.
The LED lights on the soundbar first and second (wifi and TV) is solid white
FYI - I am connected to telly through HDMI ARC
The status light on the Acoustimass unit goes from Amber to White to Red and cycles like that.
I don't think I am getting any sound from the bass module. All these were working fine until this recent update, bit frustrating and I guess am not alone here
Appreciate any solution
Thanks for confirming this.
What I would suggest is that you reach out to your local Bose product support team for further assistance as this LED status would indicate an error with your bass module.
You can reach out to your local support team via clicking this link and selecting your region, this will redirect you to our website. Please scroll to the bottom of the website and there you will find a 'Contact Us' tab, this will provide you with all the relevant contact information for your country. An agent here can happily get this resolved for you.