- Mark as New
- Bookmark
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
VI 300 unable to pair after update
02-25-2018
12:17 PM
Message 1 of 17
After the lastest firmware update. My VI 300 wireless surround speaker unable to pair with soundtouch 300. Acousticmass base module still work well.
Did re-pairing and reset the soundtouch 300 to factory setting, off power for 1min for both soundtouch 300 and the VI 300 surround speaker after which try to pair again, It is still useless. Acousticmass base module was able to pair after factory reset but not for VI 300 surround speaker.
The light on the VI surround speaker was blinking amber thru out.
One VI 300 receiver was set to Left and the other receiver was set to Right.
I did not powered on the VI 300 surround speaker during firmware update. Will it affect anything like software different?
Please help and advise.