After the lastest firmware update. My VI 300 wireless surround speaker unable to pair with soundtouch 300. Acousticmass base module still work well.
Did re-pairing and reset the soundtouch 300 to factory setting, off power for 1min for both soundtouch 300 and the VI 300 surround speaker after which try to pair again, It is still useless. Acousticmass base module was able to pair after factory reset but not for VI 300 surround speaker.
The light on the VI surround speaker was blinking amber thru out.
One VI 300 receiver was set to Left and the other receiver was set to Right.
I did not powered on the VI 300 surround speaker during firmware update. Will it affect anything like software different?
Please help and advise.
Jan 8, 2015
I am holding back on V18 updates for now. It can be months before a fix can be released if a bug is found. Really wish there is an option to postpone the updates or roll back easily.
Feb 28, 2018
I also experince same issue, or even worse one.
The upgrade to V18 was never ended successfully by itself, and i have to reset to factory default. And after that i run the re-paring, and the subwoofer was connected without any issue, but the VI can not be paired. I tried to unplug the VI and one on them connectted the other one still not, and connectivity led on soundbar was in amber blanking showed that both VI set to same side R/L, but the reality is not.
And then I unplugged both VI again and restart the reparing, and plug both again, after 3 - 4 minutes they worked fine.
Hopefully it will help you guys.
Feb 28, 2018
I called our local Bose store and they said if you are under warranty, you could request a replacement. But, this is not a comfort. The update downloaded itself! A new product would compromise itself, too! The amber light never appears, anymore.