Highlighted
Participant
  • 0
  • 1
  • 0
Registered since

Mar 21, 2017

Wireless connection Acoustimass Lifestyle 600 broken - how to restore without stereo cable?

Hello,

The Acoustimass module power cord got accidentally unplugged, now the LED is orange.  Plugging the cord back in doesn't change the orange LED so no wireless connection anymore bewteen the console and the Acoustimass module.  How can I restore the wireless connection without a stereo cable?

Regards,

Hans

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Moderator - Retired
  • 0
  • 4188
  • 226
Registered since

May 16, 2016

Re: Wireless connection Acoustimass Lifestyle 600 broken - how to restore without stereo cable?

Author Accepted Answer selected by JORISHANS

Hi JORISHANS, 

 

To reconnect the Acoustimass module, you'll need to reset the console. Here is the procedure to do so:

 

  1. Keep the TV and control console on
  2. On the control console, press and hold Source and Power for five seconds. The TV and the console will turn off.
  3. Release the buttons. The LED on the console flashes white
  4. Once the LED turns solid amber, press Power on the control console. The LED flashes white again while the system turns on and reboots
  5. Wait for the LED to turn solid white before retesting the system

Note: This reset does not erase settings. 

 

Thank you 

View solution in original post

1 REPLY 1
Highlighted
Moderator - Retired
  • 0
  • 4188
  • 226
Registered since

May 16, 2016

Re: Wireless connection Acoustimass Lifestyle 600 broken - how to restore without stereo cable?

Author Accepted Answer selected by JORISHANS

Hi JORISHANS, 

 

To reconnect the Acoustimass module, you'll need to reset the console. Here is the procedure to do so:

 

  1. Keep the TV and control console on
  2. On the control console, press and hold Source and Power for five seconds. The TV and the console will turn off.
  3. Release the buttons. The LED on the console flashes white
  4. Once the LED turns solid amber, press Power on the control console. The LED flashes white again while the system turns on and reboots
  5. Wait for the LED to turn solid white before retesting the system

Note: This reset does not erase settings. 

 

Thank you 

View solution in original post