Highlighted
Quiet Contributor
  • 0
  • 13
  • 0
Registered since

Dec 22, 2016

Adaptiq on the Soundtouch 130

After running the Adaptiq on the Soundtouch 130  , can the treble and bass  be adjusted? I noticed that they were set in the middle. If moving both to the right, will that make it more or less volume?

6 REPLIES 6
Highlighted
Gabby Guru
  • 282
  • 1358
  • 30
Registered since

Nov 12, 2015

Re: Adaptiq on the Soundtouch 130


@more drums wrote:

After running the Adaptiq on the Soundtouch 130  , can the treble and bass  be adjusted? I noticed that they were set in the middle. If moving both to the right, will that make it more or less volume?


 

Adaptiq only adjusts individual or virtual speaker volume. Bass and treble can be adjusted anytime.

Highlighted
Moderator

Re: Adaptiq on the Soundtouch 130

Hello More Drums,

 

Thank you very much for your question! 

 

ADAPTiQ is a feature to ensure that your speakers are working alongside with the acoustics in your room. This is only a recommendation, you are able to adjust these settings within the SoundTouch App at any time, including the Bass and Treble to your own personal preference. 

 

If you have any further questions please do not hesitate to ask. 

 

Tegan M - Community Support 

Feel more. Do more. Be more.
New to the community? Check out our Community Guidelines and How to use the Bose Community for helpful hints on getting started.
Highlighted
Audible Advocate
  • 0
  • 12
  • 1
Registered since

Jun 5, 2018

Re: Adaptiq on the Soundtouch 130

How do you adjust the treble and bass? Thanks.

Highlighted
Moderator

Re: Adaptiq on the Soundtouch 130

Hello Moredrums57,

 

Thanks for your question, you can adjust these audio settings by the following instruction. 

 

To adjust the bass or treble:

To adjust the bass:

  1. On the remote control, press the System button
  2. Press the down arrow to navigate to "BASS LEVEL"
  3. Press the left or right arrow to set the desired bass level
  4. Press EXIT to exit the menu

To adjust the treble:

  1. On the remote control, press the System button
  2. Press the down arrow to navigate to "TREBLE LEVEL"
  3. Press the left or right arrow to set the desired treble level
  4. Press EXIT to exit the menu

 

I hope this helps, get back to us if you have any further questions. 

 

Kind regards,

Tegan M 

Feel more. Do more. Be more.
New to the community? Check out our Community Guidelines and How to use the Bose Community for helpful hints on getting started.
Highlighted
Quiet Contributor
  • 0
  • 13
  • 0
Registered since

Dec 22, 2016

Re: Adaptiq on the Soundtouch 130

Thanks for the reply.

 

No matter which way you slide the the arrow left or right its still the same.

Would it be better to reset back to default and run Adaptq over again?

It doesn't  have the showroom sound.

Highlighted
Moderator

Re: Adaptiq on the Soundtouch 130

Hello more drums, 

 

Thanks for getting back to us. 

 

If you wish to run AdaptIQ, you can, this will calibrate the speakers to the room you are in. It is rare that you will need to make finetuned adjustments after running AdaptIQ, but then again, everyone's preference is different, so you may opt for more bass, or harsher trebles. Please give AdaptIQ a try and see if it helps you. 

 

Remember, you will never get the exact same tone as the showroom as the acoustics and materials in your room are completely different from the materials in the store. 

 

Kind regards, 

 

Jeff G

Feel more. Do more. Be more.
New to the community? Check out our Community Guidelines and How to use the Bose Community for helpful hints on getting started.