Hi, I can't add my Lifestyle 135 to my SoundTouch account? It is connected to my WiFi network, but in the last step by adding to SoundTouch I get some error message!? Please help.
Hey @Rene M., thanks for posting, and welcome to the Bose Community!
I am sorry to hear that you're having trouble connecting your Lifestyle SoundTouch 135 system. Could you please let me know the error message that you are receiving?
Have you been able to connect before, or is the first time you are setting it up?
I send you Screenshots of my mobile with error messages. (Sorry, it is in Czech, but you will know what´s happend). First pictures - Soundtouch found Lifestyle 135 "Loznice Bose", second - I have to set the name, third - it is unable to connect and to add this system to Soundtouch!?
It is for the first time I want to add this system to my SoundTouch network (already I have connected 5x Soundtouch 10 and 1x Soundtouch 20).
Thank´s for help.
Thank you for providing the screenshots, Rene. I suspect the issue is to do with the firmware of the SoundTouch adapter for your LS135. The good news is we can update the firmware, by following the procedure shown under the heading 'Manually updating using a USB cable' HERE.
Once the firmware has successfully installed onto the SoundTouch adapter, go through the setup one more time over, and you should find no issues. Let me know how things go!
I have tried to update the firmware by "Manually updating with a USB cable".
After 20 minutes I saw only this screen:
so I have disconnected the cable connection.
Than I tried to update the firmware by "Updating with USB thumb drive".
The procces started correctly, but again after 20 minutes without feedback I ejected the USB drive.
And from this moment the light on the SoundTouch adapter does not light at all (although the adapter is connected to the console).
It is not possible to connect the console to the WiFi. The LED on the console by StandBy lights few minutes red, but then goes out completely (doesn´t light).
I tried to reset to adapter and also restart to the factory settings - but without success.
What is wrong and what should I do, to "wake up" the adapter for normal use?
Thank you for your help.
Thank you for giving that a try. It's possible the update may take more than 20 minutes to complete as it may have never been updated. Therefore, next time we run through the process of updating with a USB cable, I'd recommend giving it at least an hour and then deciding whether to continue.
Also, a note about the LED - did this disappear as soon as you stopped updating with the cable, or when you tried to update using the USB drive?
Since your post has the LED status changed or is it still failing to light up after trying resets?
It is not possible to update the adapter through USB cable, because after connection to the pc the computer "can't see" the adapter, although the adapter is connected to the console and the console is on.
About the white LED on adapter - I think it stopped update by USB drive.
And after reset is the situation the same, the white LED on adapter stay off.