Highlighted
Contributor
  • 0
  • 6
  • 1
Registered since

May 10, 2020

SoundTouch 20 LED status indicator is not lighting when the unit is off

SoundTouch 20 LED status indicator is not lighting when the unit is off. The program detects the speaker though.  I did reset the unit twice by unplugging but did not work, the screen is pitch black I would appreciate any suggestions to light up the LED status indicator back on. Thanks in advance.

Connection-Ethernet

Software v 24.0.7

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Contributor
  • 0
  • 6
  • 1
Registered since

May 10, 2020

Re: SoundTouch 20 LED status indicator is not lighting when the unit is off

Author Accepted Answer selected by cem321

 After reading the article below    https://www.bose.com/en_us/support/articles/HC2472/productCodes/soundtouch_20_ii/article.html 

I understood LED indicator does not light due ETHERNET connection.  Thank you for your attention.

View solution in original post

1 REPLY 1
Highlighted
Contributor
  • 0
  • 6
  • 1
Registered since

May 10, 2020

Re: SoundTouch 20 LED status indicator is not lighting when the unit is off

Author Accepted Answer selected by cem321

 After reading the article below    https://www.bose.com/en_us/support/articles/HC2472/productCodes/soundtouch_20_ii/article.html 

I understood LED indicator does not light due ETHERNET connection.  Thank you for your attention.

View solution in original post