You can use the Bose 901's with most any modern receiver. You do not need tape monitor jacks (in & out) to use the Bose 901's with your stereo. Just buy a $20 switcher: RCA or GE Pro 4-Device Audio/Video Switch available through Wal-Mart and on line. The Bose equalizer plugs into the switcher, the switcher into any input jack on your receiver and then you can choose (on the switch box) up to 4 devices to play (CD, FM radio, computer, Sirus/XM radio, etc.).
Jun 16, 2020
Jul 2, 2020
Jun 22, 2020
The Bose EQ has to be "between" the source (CD, XM radio, computer, Amazon Alexa, etc.) and the power amp. So you have to plug in all of your music sources into the switcher. The switcher output then goes into the input jacks of the EQ. The EQ output goes into the AUX input of the receiver. I just keep my receiver always on AUX and choose which source I want to listen to on the $20 switcher.
Aug 17, 2019
Here is another possible three ways you can connect either your BOSE 901 Equalizer or a Deer Creek Audio EQ901B to your Audio Video Receiver (AVR)
Plan A) EQ901B Set Up using Zone 2 Loop
This example is for the VSX-90, however the same principles apply to your AVR.
1) Connect Zone 2 Pre Out to the EQ901 input.
2) Connect the EQ901 output to an unused analog input such as SAT/CBL
3) Select the Zone 2 source as Analog CD, or whatever your input source is.
4) Select the Zone 1 source as SAT/CBL
The EQ'd signal will now play thru the front speaker outputs in Stereo Mode Zone 1
Plan B) Adding a separate power amplifier and use the Zone 2 Pre Out to drive it
1) Select the Zone 2 source as Analog CD, or whatever your input source is.
The EQ'd signal will now play thru the front speaker outputs in Stereo Mode Zone 2
Plan C) Setting up the EQ901B with only one source
1) If for example your only source is a CD player. Connect the EQ901B in between the CD and AVR. This may require the 2V input mode on the EQ901B
The EQ'd signal will now play only when CD is selected as the input on the VCR